Preferred Language
Articles
/
joe-361
Development the Mechanical Properties of (AL-Li-Cu) Alloy
...Show More Authors

The aim of this research is to develop mechanical properties of a new aluminium-lithium-copper alloy. This alloy prepared under control atmosphere by casting in a permanent metal mould. The microstructure was examined and mechanical properties were tested before and after heat treatment to study the influence of heat treatment on its mechanical properties including; modulus of elasticity, tensile strength, impact, and fatigue. The results showed that the modulus of elasticity of the prepared alloy is higher than standard alloy about 2%. While the alloy that heat treated for 6 h and cooled in water, then showed a higher ultimate tensile stress comparing with as-cast alloy. The homogenous heat treatment gives best fatigue behaviour comparing with as-cast and other heat treatment alloys. Also, the impact test illustrates that the homogeneous heat treatment alloy gives the highest value.

  

View Publication Preview PDF
Quick Preview PDF
Publication Date
Mon Mar 11 2019
Journal Name
Baghdad Science Journal
Study the Effect of Cold Plasma on the Nonlinear Properties of Polymeric Membranes Rod Amine (R3Go)
...Show More Authors

The nonlinear optical properties for polymeric (PMMA) doping with dye Rhodmine (R3Go) has been studied .The samples are prepared by normal polymerization method with concentrations of 5x10-5mol/l and a thickness of 272.5µm.

                         Plasma effect was studied on samples prepared before and after exposure to the Nd: YAG laser for three times 5, 10 and 15 minutes. Z-Scan technique is used to determine the nonlinear optical properties such as; refractive index (n2) and the coefficient of nonlinear absorption (β). It was found that the nonlinear properties is change by increasi

... Show More
View Publication Preview PDF
Scopus (4)
Crossref (2)
Scopus Clarivate Crossref
Publication Date
Fri Dec 01 2017
Journal Name
Al-nahrain Journal For Engineering Sciences (njes)
Investigation of the thermodynamic, kinetic and equilibrium parameters of batch biosorption of Pb (II), Cu (II), and Ni (II) from aqueous phase using low cost biosorbent
...Show More Authors

In this study, low cost biosorbent ̶inactive biomass (IB) granules (dp=0.433mm) taken from drying beds of Al-Rustomia Wastewater Treatment Plant, Baghdad-Iraq were used for investigating the optimum conditions of Pb(II), Cu(II), and Ni(II) biosorption from aqueous solutions. Various physico-chemical parameters such as initial metal ion concentration (50 to 200 mg/l), equilibrium time (0-180 min), pH (2-9), agitation speed (50-200 rpm), particles size (0.433 mm), and adsorbent dosage (0.05-1 g/100 ml) were studied. Six mathematical models describing the biosorption equilibrium and isotherm constants were tested to find the maximum uptake capacities: Langmuir, Freundlich, Redlich–Peterson, Sips, Khan, and Toth models. The best fit to the P

... Show More
Preview PDF
Publication Date
Tue Jun 01 2021
Journal Name
Baghdad Science Journal
Effect of SnO2/In2O3 Atomic Ratio on the Structural and Optical Properties of ITO Thin Filmsof SnO2:In2O3 Thin Film Composite Ratio on Structural and Optical Properties
...Show More Authors

In this work, the effect of atomic ratio on structural and optical properties of SnO2/In2O3 thin films prepared by pulsed laser deposition technique under vacuum and annealed at 573K in air has been studied.  Atomic ratios from 0 to 100% have been used. X-ray diffraction analysis has been utilized to study the effect of atomic ratios on the phase change using XRD analyzer and the crystalline size and the lattice strain using Williamson-Hall relationship. It has been found that the ratio of 50% has the lowest crystallite size, which corresponds to the highest strain in the lattice. The energy gap has increased as the atomic ratio of indium oxide increased.

View Publication Preview PDF
Scopus (1)
Crossref (1)
Scopus Clarivate Crossref
Publication Date
Sun Dec 31 2017
Journal Name
College Of Islamic Sciences
The saying of Al-Azhar in the fatwas with it from the words of Imam Zafar (may God have mercy on him) by Imam Pirizadeh Al-Hanafi (d. 1099 AH)
...Show More Authors

It is no secret to anyone that studying and investigating books of jurisprudence, despite their suffering, is a pleasure that cannot be compared to pleasure, and it has benefits and importance that cannot be limited and summed up, and it has great fruits that researchers and students of knowledge reap, as well as enriching libraries with jurisprudential material, after dusting them and taking them out to the light of libraries to be seen. Researchers and scholars, generation after generation, so that this nation can benefit from this pioneering intellectual and scientific product that was written for us by our first ancestors of working scholars who enriched human civilization with this scientific material, which has become a beacon guid

... Show More
View Publication Preview PDF
Publication Date
Sat Aug 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Simulation of Sediment Transport in the Upper Reach of Al-Gharraf River
...Show More Authors
Abstract<p>For the past few years, the sediment began to accumulate in Al-Gharraf River which reduces the flow capacity of the River. In the present research, a numerical model was developed using Hec-Ras software, version 5.0.4. to simulate the flow and sediment transport in the upper reach of the river. The hydrological and cross-section data measured by the Ministry of Water Resources, for the reach located between Kut and Hai cities and having a length of 58200 m, was used to perform calibration and verification of the model. Moreover, field sampling of suspended and bed loads was gathered for five months starting from 7/2/2019, and laboratory tests of samples were conducted to be used as in</p> ... Show More
View Publication
Scopus (12)
Crossref (1)
Scopus Crossref
Publication Date
Sun Mar 12 2017
Journal Name
Al-academy
The Constructive Mutation of installation Systems in the works of the artist Ali Al-Najar ِArt
...Show More Authors

The research entitled: (The Constructive Mutation of installation Systems in the Artworks of the artist Ali Al-Najar) has dealt with the concept of Mutation and its systematizations in installation in the artworks of (Ali Al-Najjar).
The research has four chapters: The first Chapter deals with the methodological framework represented by the basic problem of the research, that is concerned with the constructive mutation of installation systems.
The research aims at finding out the constructive mutation of installation systems in the artwork of ( Ali al-Najar). The research is limited by analyzing visual samples of (Ali Al-Najjar) artworks betwen (1967-1991)
The second chapter deals with the theoretical framework, it has five s

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sat Dec 15 2018
Journal Name
Journal Of The College Of Education For Women
The role of Hajjaj bin Yusuf Al - Thaqafi in the linguistic reform of the Holy Quran
...Show More Authors

During his tenure in Iraq, al-Hadjjaj bin Yusif undertook administrative and economic reforms as well as linguistic reform.

The efforts exerted by Abu al-Aswad al-Dawali to control the reading of the Holy Quran were not sufficient, so the melody and error continued and became more pronounced, especially since the letters were written until then without any distinguishing features.

Al- Hadjjaj bin Yusuf realized the seriousness of the continuation of these errors and what he talked with the days of the causes of division and disagreement between the Muslim community ordered his book to put these suspicious characters marks was at the head of the book Nasr bin Asim and Yehi bin Muammar

View Publication Preview PDF
Publication Date
Sat Dec 31 2022
Journal Name
College Of Islamic Sciences
Weighting between the texts as the ruling when Imam Al-Salmi
...Show More Authors

abstract:

Objectives: The study aims to reveal the approach of Imam Al-Salmi in the weighting between the apparently conflicting texts, and to show the extent of his agreement and disagreement with the rest of the fundamentalists, and does he have vocabulary that can be used to elicit legal rulings in modern contemporary issues?

Method: The method of induction and analysis is one of the main tools to reach the research results. The study resorted to following the sayings of Imam Al-Salmi in various sources and fatwas and standing on them, then analyzing and applying them to the various branches of jurisprudence in the various jurisprudential chapters.

... Show More
View Publication Preview PDF
Publication Date
Sat Jan 04 2020
Journal Name
زانكو - الإنسانيات
The Effect of Linguistic Propositions on the Collection of Arabic Language Norms and the Development of Critical Thinking among Middle-Grade Students.
...Show More Authors

The reality of teaching the Arabic language rules is not satisfactory, as the pedagogical methods used do not help students develop their mental skills, especially critical thinking skills. They are often traditional in terms of teaching students, who are passive, passive, often passive, active, and often active, their listening task, and the teacher's task of narrating facts and judgments. It is a blind simulation student, a dependency on others, and a weak spirit of creativity, innovation, and opinion. The opinions of educators and teachers almost agree on the reasons for students' weakness in learning the rules of Arabic, and that the reason lies in the way of teaching. The difficulty or the ease of the rules of Arabic does not lie in th

... Show More
View Publication Preview PDF
Publication Date
Tue Feb 12 2019
Journal Name
Iraqi Journal Of Physics
A study of the structural and electrical properties of Ni1-x Cox Fe2O4 ferrites
...Show More Authors

Ferrite with general formula Ni1-x Cox Fe2O4(where x=0.0.1,0.3,0.5,0.7, and 0.9), were prepared by standard ceramic technique. The main cubic spinel structure phase for all samples was confirmed by x-ray diffraction patterns. The lattice parameter results were (8.256-8.299 °A). Generally, x -ray density increased with the addition of Cobalt and showed value between (5.452-5.538gm/cm3). Atomic Force Microscopy (AFM) showed that the average grain size and surface roughness was decreasing with the increasing cobalt concentration. Scanning Electron Microscopy images show that grains had an irregular distribution and irregular shape. The A.C conductivity was found to increase with the frequency and the addition of Cobal

... Show More
View Publication Preview PDF
Crossref (1)
Crossref