Preferred Language
Articles
/
joe-257
Dust Effect on the Efficiency of Silicon Mono Crystalline Solar Modules at Different Tilt Angles at Al-Jadryia Climate Conditions
...Show More Authors

Solar energy usage in Iraq is facing many issues; one of those is the accumulation “of the dust on the surface of the solar module which” would highly lower its efficiency. The present work study the effect of dust accumulation” on installing fixed solar modules with different inclined angles 15o, 33o, 45o, 60o. Evaluation of the solar modules performance under different circumstance conditions such as rain, wind and humidity are considered in study of dust effect on solar module performance. The results show that the lowest output average efficiencies of solar modules occurs at 15o horizontally inclined angle are 7.4% , 6.7% , 8.0% , 8.1%, and 8.4% for the corresponding  months; June, July, August, October, and September respectively while the highest average efficiencies are 8.9% , 9.1% , 9.4% , 9.6% , 9.6% for an inclined angle 60o for the same month. lose power output rate for angle 15o horizontally inclined solar modules are as following 32.6%, 32%,31.6%,34.9%,26.2% for months; June, July, August, October, and September respectively , while the results for the 60o horizontally inclined solar module are 26.9%, 17%, 24.2%, 28.1%, and 9.7% for the same five months. As a final result is that the 15o horizontally inclined solar panel is less efficient compared with the 60o horizontally inclined solar panel and the difference in the results in the months was mainly due to the weather changes (summer and winter). The solar modules efficiency and lose power rate values for the inclination angles 33o and 45o are ranged between the values of 15oand 60o inclination angles.

 

 

View Publication Preview PDF
Quick Preview PDF
Publication Date
Thu Nov 08 2018
Journal Name
Iraqi National Journal Of Nursing Specialties
Evaluation the effect of burning investment and black sand materials on the surface roughness of acrylic resin denture base
...Show More Authors

Objective: The aim of this study was to evaluate the effect of pumice, burning investment material
and black sand on the surface roughness of heat cure acrylic resin.
Methodology: Sixty specimens were prepared from pink heat cure acrylic resin, the specimens
where grouped into; 20 specimens which polished with pumice and water (control group); 20
specimens which polished with investment material (after burning it) and water; and 20 specimens
which polished with black sand and water. The average surface roughness of specimens after
polishing procedure had been determined by profilometer (surface roughness tester).
Results: Through the application of ANOVA and LSD tests, the result of this study showed that there
wa

... Show More
View Publication Preview PDF
Publication Date
Sat Jan 01 2022
Journal Name
Journal Of The Mechanical Behavior Of Materials
Experimental and numerical study of the bulb's location effect on the behavior of under-reamed pile in expansive soil
...Show More Authors
Abstract<p>In this experimental and numerical analysis, three varieties of under-reamed piles comprising one bulb were used. The location of the bulb changes from pile to pile, as it is found at the bottom, center, and top of the pile, respectively. <italic>PLAXES 3D</italic> was used to conduct the research. In expansive soil, the under-reamed piles were 350 mm long, with the pile tip in dense sandy soil. The experiment was carried out in both saturated and unsaturated circumstances. The influence of the bulb location on the pile's bearing capacity for vertical and lateral loads, as well as the amount of swelling pressure and upward movement owing to swelling, was investigated. The re</p> ... Show More
Crossref (6)
Crossref
Publication Date
Tue Mar 15 2022
Journal Name
Journal Of Baghdad College Of Dentistry
Effect of Resin Infiltration and Microabrasion on the Microhardness of the Artificial White Spot Lesions (An in Vitro Study)
...Show More Authors

Crossref (9)
Crossref
Publication Date
Tue Mar 15 2022
Journal Name
Journal Of Baghdad College Of Dentistry
Effect of Resin Infiltration and Microabrasion on the Microhardness of the Artificial White Spot Lesions (An in Vitro Study)
...Show More Authors

Background: White spot lesion is the first visible sign of dental caries that is characterized by demineralized lesion underneath an intact surface. Several studies demonstrated that they could be treated using noninvasive techniques like the use of fluoride or casein phospho-peptide and amorphous calcium phosphate. Improvement in aesthetic outcomes by covering the demineralized enamel is one of the advantages of the use of resin infiltration and opal-ustre microabrasion, which are two new techniques that had been used for treatment of white spot lesion. The purpose of this study was to evaluate the impact of resin infiltration and microabrasion in the microhardness of the artificial white spot lesions at various depths. Material and method

... Show More
View Publication Preview PDF
Scopus (13)
Crossref (9)
Scopus Crossref
Publication Date
Tue Apr 01 2025
Journal Name
Georgian Medical News
THE EFFECT OF SOFT ROBOTIC GLOVE ON THE FLEXION AND EXTENSION OF HAND FOR STROKE PATIENTS: A CLINICAL TRIAL
...Show More Authors

Background: Stroke defined by diminished cerebral blood flow, results in brain damage and neurological impairments. It often leads to considerable difficulties, such as limited mobility and compromised hand function, usually manifesting as a weakening in the ability to open and shut the hand. Objective: The study evaluates the differences between opening and closing hands when utilizing a soft robot. Methods: The study was conducted in the Mosul Specialist Rehabilitation Center which involved 68 participants, all over 20 years old, with visual impairments. The Iranian Clinical Trials Registry and Ministry of Planning approved the study, The Fugl-Meyer Assessment for Upper Extremity Action Research Arm Test, and Arm Motor Ability Test were

... Show More
Scopus
Publication Date
Sun Jan 27 2019
Journal Name
Journal Of The College Of Education For Women
Al-arbaeen Al-boldniy for Ibin Asker Historical Study
...Show More Authors

Fortieth book is IbnAssaker mechanisms of modern books authored attention appeared amenable to the Messenger of Allah's will (Fife da upon h-d) in his emotional tempting scientists say despite his weakness and preached it save forty Hadith of year necessitated intercession and entering heaven eh Fife FA scientists 1940s h.g. Gae updated combines forty Hadith on a particular topic, authored destinations differed and collected and compiled, the first item in the 1940s that Abdul Rahman Abdullah ibn al-mubaarakmarvzishaikAssaker promised more than thirty workbook in this kind of composition topics varied between consolidation and conversations prove the Almighty Barry qualities, conversations provisions, worship, preaching, and of them only

... Show More
View Publication Preview PDF
Publication Date
Sun Feb 10 2019
Journal Name
Journal Of The College Of Education For Women
Narrative Structures in Abu AL– Hassan AL- Shushtary Poetry
...Show More Authors

The Al-Shishtary is considered one of the well-known Andalus poets. His poetry represents a flood of kind emotions, springs from the sincere sources of Divine Love, and this is what we felt in his life and his literary prestige. He was a poet who was familiar withthe art of his timeknowsthe oldand popularintellectual assets ofIslamicSciencesof Sharee'a. This wide culture, which he had, is available to him through his many travels between the coasts of Syria, Egypt and others ... to become Imam of the religion way known as(Al-Shishtariyah)resonatedin the hearts ofthe general publicespecially the poor people. This showshis smoothand influential styleand his humanitarian andsimple words which resonate in the hearts of his followers, therefo

... Show More
View Publication Preview PDF
Publication Date
Sun Mar 15 2020
Journal Name
Journal Of The College Of Education For Women
The Commercial Job in Abu Tayara Street in the Municipality of Al- Dora
...Show More Authors

The commercial job is one of the most important businesses in the cities as there is no city can exist without commercial markets to offer service to its inhabitants. This study aims to distribute the commercial function in Abu Tayara Street located in the municipality of Al-Dora by highlighting the size of such businesses in this street. It focuses on analyzing the change that has occurred due to the usages of the commercial land not only in the residential areas, but also in various aspects associated with the growth of the population in the city. Both expansion and development of the economic and social aspects in the area have increased the demand for commercial services. So, the research focuses on the aspects of functional speciali

... Show More
View Publication Preview PDF
Publication Date
Tue Mar 15 2022
Journal Name
Al-academy
Experimentation in the works of the artist Muhammad Al-Kinani" an anaylytical study"
...Show More Authors

The problem of the tagged research (experimentation in the works of the artist Muhammad al-Kinani is an analytical study) dealt with the nature of the concept of experimentation and its work in the works of Muhammad al-Kinani. Which adopts the removal of the concept of style and artistic style and takes the experience away from the pattern of repetition The importance of the research comes through the identification of the materials founding the artistic work. The current research benefits the specialists in the field of arts from the students of studies with a new and renewed formulation of creativity. The research objectives shed light on the contemporary experiences of the artist Muhammad Al-Kinani and its importance in benefiting res

... Show More
View Publication Preview PDF
Crossref
Publication Date
Wed May 10 2023
Journal Name
Journal Of Engineering
Effect of Petroleum Products on Steel Fiber Reinforced Concrete
...Show More Authors

This Investigation aims to study the effect of adding Steel fibers with different volume fractions Vf (o.5, 0.75, and 1% by volume of concrete) with aspect ratio 100 on mechanical properties of concrete, and also
finding the influence of petroleum products (Kerosene and Diesel) on mechanical properties of Steel Fiber Reinforced Concrete (SFRC).
The experimental work consists of two groups: group one consists of specimens (cubes and prisms) plain and concrete reinforced with steel fiber exposed to continuous curing with water. Group two consists of
specimens (cubes and prisms) plain and concrete reinforced with steel fiber exposed to kerosene and diesel after curing them in water for 28 days before exposure. The results of all te

... Show More
View Publication Preview PDF
Crossref