Flow of water under concrete dams generates uplift pressure under the dam, which may cause the dam to function improperly, in addition to the exit gradient that may cause piping if exceeded a safe value. Cutoff walls usually used to minimize the effect of flow under dams. It is required to
1)minimize the flow quantity to conserve water in the reservoir, it is also required to
2)minimize the uplift pressure under the dam to maintain stability of the dam, and it is required to

3) minimize the exit gradient to prevent quick condition to occur at the toe of the dam where piping may occur and may cause erosion of the soil. Varying the angle of cutoff walls affects its influence on the factors aforementioned that are required to

The present study focused mainly on the vibration analysis of composite laminated plates subjected to
thermal and mechanical loads or without any load (free vibration). Natural frequency and dynamic
response are analyzed by analytical, numerical and experimental analysis (by using impact hammer) for
different cases. The experimental investigation is to manufacture the laminates and to find mechanical
and thermal properties of glass-polyester such as longitudinal, transverse young modulus, shear modulus,
longitudinal and transverse thermal expansion and thermal conductivity. The vibration test carried to
find the three natural frequencies of plate. The design parameters of the laminates such as aspect ratio,
thickness

The AlAdhaim Dam is located 133 kilometers northeast of Baghdad. It is a multipurpose dam and joints the Iraqi dam system in 2000. It has a storage capacity of 1.5 billion m³. The dam has an ogee spillway with a length of 562 m, a crest level of 131.5 m.a.m.s.l. and a maximum discharge capacity of 1150 m³/s at its maximum storage height of 143 m.a.m.s.l. This research aimed to investigate the hydrodynamics performance of the spillway and the stilling basin of AlAdhiam Dam by using numerical simulation models under gated situations. It was suggested to modify the dam capacity by increasing the dam's storage capacity by installing gates on the crest of the dam spillway. The FLUENT program was used to

         The main objective of this research is to design and select a composite plate to be used in fabricating wing skins of light unman air vehicle (UAV). The mechanical properties, weight and cost are the basis criteria of this selection. The fiber volume fraction, fillers and type of fiber with three levels for each were considered to optimize the composite plate selection. Finite element method was used to investigate the stress distribution on the wing at cruise flight condition in addition to estimate the maximum stress. An experiments plan has been designed to get the data on the basis of Taguchi technique. The most effective parameters at the process to be find out by employing L₉

Buckling analysis of composite laminates for critical thermal (uniform and linear) and mechanical loads is reported here. The objective of this work is to carry out theoretical investigation of buckling analysis of composite plates under thermomechanical loads, and experimental investigation under mechanical loads. The analytical investigation involved certain mathematical preliminaries, a study of equations of orthotropic elasticity for classical laminated plate theory (CLPT), higher order shear deformation plate theory (HSDT) , and numerical analysis (Finite element method), then the equation of motion are derived and solved using Navier method and Levy method for symmetric and anti-symmetric cross-ply and angle-ply laminated plates t

تركت العولمة المتسارعة أثرا عميقا على مدى واسع من السياسات والتطبيقات الاقتصادية في كل من الدول النامية والمتقدمة على حد سواء, إذ نشأت الأنظمة الضريبية الحالية عندما نمّط كل بلد سياسته الضريبية بشكل تركز معه على متطلبات الاقتصاد المحلي, وعندما كانت تعقد المفاوضات بين الأمم المختلفة حول المعاملات الضريبية والاتفاقات الضريبية كانت تجري في إطار من هيمنة السياسة الضريبية المحلية.

لكن العولم

Recent advancement in production technologist of manufacturing processes have left an important effects upon cost structure. Moreover the problem for providing necessary and adequate information for managerial decision making.

Therefore the cost – volume – profit analysis under the new activity based costing has replace the old method for Analysing the relation between C.V.P with respect to profit planning and control.

In brief the C.V.P object is to discuss the effect of changes on profit resulting from changes in sales volume, cost of manufacturing and selling price.

This study consists of four chapters:

The first chapter dea

ت نايبتسلاا ثحابلا مدختسا دقو ,ةيداصتقلاا تادحولا ةميق ىلع انوروك ةحئاج لظ يف يلخادلا قيقدتلا ريثأت ةيداصتقلاا تادحولا فادها قيقحت يف مهسي يلخادلا قيقدتلا نا ثحبلا تاجاتنتسا مها تناكو , ثحبلا تاريغتم نيب ةقلاعلا نايبل رطاخملا ةرادأو اهتءافكو اهتيلعاف نيسحتو قيقدتلا عقوم زيزعت ىلع لمعلا تايصوتلا مها تناكو امك, ةمكوحلا تايلمعو ةباقرلاو قيقحتل رارمتسأب ئراوطلا ططخ ثيدحتو ةبقارمو ةحضاو تازفحم ءاشناو ةلمتحم

This research aims at identifying problems  that the  Iraqi widow woman suffers from. The research is limited to a Sample of terrorism victims widows which is up to (70) widows from Al-Amal center for widows and orphans care in Baghdad.                                                                                <