In this work an experimental simulation is made to predict the performance of steady-state natural heat convection along heated finned vertical base plate to ambient air with different inclination angles and configurations of fin array. Two types of fin arrays namely vertical fins array and V-fins array on heated vertical base plate are used with different heights and spaces. The influence of inclination angle of the plate , configuration of fins array and fin geometrical parameters such as fin height and fin spacing on the temperature distribution, base convection heat transfer coefficient and average Nusselt number have been plotted and discussed. The experimental data are correlated to a formula between average Nusselt number versus Rayleigh number for vertical plate and vertical fins array. The results indicate that the configuration of V-fins array gave best natural-convection heat transfer performance as base heat transfer coefficient about 20% greater compared with vertical fins array. Experimental simulation data and correlations of the present work are compared with a previous works shows good agreement.
A total of 45 voucher specimens of falcons which are deposited in the bird's collection of the Iraq Natural History Research Center and Museum (INHM) were reviewed. Mummified falcons were preserved as voucher study specimens and tagged with museum collection labels. In the current study, morphometrics of six species of the genus Falco Linnaeus, 1758: Lanner falcon F. biarmicus Temminck, 1825; Sacker Falcon F. cherrug Gray, 1834; Lesser Kestrel F. naumanni Fleischer, 1818; Peregrine Falcon F. peregrines Tunstall, 1771; Eurasian Hobby F. subbuteo Linnaeus, 1758 and Common Kestrel F. tinnunculus Linnaeus, 1758 were documented. These species were recorded previously in the ornithological literatures by several authors and deposited in t
... Show More
(1)
A total of 45 voucher specimens of falcons which are deposited in the bird's collection of the Iraq Natural History Research Center and Museum (INHM) were reviewed. Mummified falcons were preserved as voucher study specimens and tagged with museum collection labels. In the current study, morphometrics of six species of the genus Falco Linnaeus, 1758: Lanner falcon F. biarmicus Temminck, 1825; Sacker Falcon F. cherrug Gray, 1834; Lesser Kestrel F. naumanni Fleischer, 1818; Peregrine Falcon F. peregrines Tunstall, 1771; Eurasian Hobby F. subbuteo Linnaeus, 1758 and Common Kestrel F. tinnunculus Linnaeus, 1758 were documented.
These species were recorded previously in the ornithological literatures by several authors and deposited in the
(1)
(188)
(168)
Background: tooth debonding was one of the major reasons for denture repair. With the use of recently introduced thermoplastic denture base materials the problem of tooth debonding increased due to the nature of the bond between these materials and the acrylic teeth. This study was aimed to assess the bond of the acrylic teeth to conventional heat cure acrylic resin and to thermoplastic resin denture base material and methods to enhance it. Materials and methods: acrylic resin teeth were bonded to heat cure acrylic resin with and without wetting the ridge laps of the teeth with monomer and acrylic teeth with prefabricated retentive holes, unmodified and modified, in their ridge laps were processed with Valplast thermoplastic resin denture b
... Show MoreIn this paper, an experimental analysis of conventional air-cooled and microchannel condensers in automotive vapor compression refrigeration cycle concerning heat transfer coefficient and energy using R134a as a refrigerant was presented. The performance of two condensers and cycles tested regarding ambient temperature which it was varied from 40oC to 65oC, while the indoor temperature and load have been set to be 23oC and 2200 W respectively. Results showed that the microchannel condenser has 224 % and 77 % higher refrigerant side and air side heat transfer coefficient respectively than the coefficients of the conventional condenser. Thus, the COP, in case of using the microchannel
... Show More
(3)
(6)
(1)
In the present work, the thermo-fluid characteristics of a heat exchanger formed of helical coiled tubes immersed in cold water are investigated experimentally. Two types of helical coiled tube are tested, a conventional vertical single helical coiled tube and a new triple vertical helical coiled tube in parallel connection called as meshed coils. The effect of hot water flow rates inside the tubes (ranges from 2.67 to 7.08 l/min), and its inlet temperatures (namely 50, 60, 70 and 80 °C) are investigated. The experimental results show that increasing the flow rate inside the meshed coils leads to decrease the temperature difference between inlet and outlet. An enhancement of heat transfer for meshed coils compared to single coil has been n
... Show More
(13)
(10)
(1)
The In this experimental study, natural stone powder was utilized to improve a cohesive soil’s compaction and strength properties. According to the significant availability of limestone in the globe, it has been chosen for the purpose of the study, in addition to considering the existing rock industry massive waste. Stone powder was used in percentages of 4, 8, 12, 16% replaced from the soil weight in dry state. Some of cohesive soil’s consistency, shear, and compaction properties were depicted after improvement. The outcomes yielded in significant amendments in the experimented geotechnical properties after stone powder addition considering 60 days curing period. Cohesion and friction angle were notably increased by
... Show More
(1)