In recent years, the search for economic and environmentally friendly alternatives has become a global necessity to achieve sustainability and preserve raw materials. From this concept, natural bitumen (NB) derived from sulphur springs is now one of the most promising alternative energy resources for many applications, especially in asphalt pavement construction. Its low price and abundance characterise NB since sulphur springs produce thousands of tonnes of NB annually and are used in very limited fields. Two main objectives were adopted for this work. The first objective is to examine the virgin NB properties from five sulphur springs and compare them with petroleum asphalt. The second objective is to enhance NB properties by applying heat treatment. The experimental results reveal that heat treatment is highly effective in improving the NB properties. This was confirmed by conducting many tests, such as asphalt, Marshall, SEM-EDX, and indirect tensile strength tests. Based on the experimental test outcomes, virgin NB properties do not conform to asphalt specification limits and are unsuitable for flexible roads. Also, MS-NB significantly affected the mechanical properties of the asphalt mixture, as Marshall's stability increased by 41.3% compared to the conventional mixture. In addition, SS-NB was more effective in moisture damage resistance due to increasing the tensile strength ratio by 5.72 % and provided a higher stiffness index than the conventional mixture by 40.36%. In conclusion, the treated NB can successfully be used as a binder material in hot asphalt mixtures. ABSTRAK: Beberapa tahun kebelakangan, pencarian alternatif baharu ekonomi dan mesra alam telah menjadi satu keperluan global bagi mencapai kemampanan dan memelihara bahan mentah. Melalui konsep ini, bitumen asli (NB) yang diperoleh daripada mata air sulfur kini merupakan satu sumber tenaga alternatif yang berguna bagi digunakan dalam pelbagai aplikasi, terutamanya dalam pembinaan turapan asfalt. NB dicirikan oleh harga yang rendah dan kelimpahannya kerana mata air sulfur menghasilkan beribu-ribu tan NB setiap tahun dan digunakan dalam bidang terhad. Dua objektif utama telah dipakai untuk kajian ini. Objektif pertama adalah memeriksa sifat NB dara daripada lima mata air sulfur dan membandingkannya dengan asfalt petroleum. Objektif kedua adalah meningkatkan sifat NB dengan menggunakan rawatan haba. Dapatan eksperimen mendedahkan bahawa rawatan haba sangat berkesan dalam meningkatkan sifat NB. Ini disahkan dengan menjalankan pelbagai ujian, seperti ujian asfalt, ujian Marshall, ujian SEM-EDX, dan ujian kekuatan tegangan tidak langsung. Berdasarkan dapatan eksperimen, sifat NB dara tidak mematuhi had spesifikasi asfalt dan tidak sesuai untuk jalan fleksibel. Selain itu, MS-NB mempunyai kesan ketara pada sifat mekanikal campuran asfalt kerana kestabilan Marshalls meningkat sebanyak 41.3% berbanding campuran konvensional. Tambahan, SS-NB lebih berkesan dalam rintangan kerosakan lembapan kerana meningkatkan nisbah kekuatan tegangan sebanyak 5.72 % dan memberikan indeks kekukuhan yang lebih tinggi daripada campuran konvensional sebanyak 40.36%. Kesimpulannya, NB yang dirawat boleh berjaya digunakan sebagai bahan pengikat dalam campuran asfalt panas.
Pollutants generation is strongly dependant on the firing temperature and reaction rates of the gaseous reactants in the gas turbine combustion chamber. An experimental study is conducted on a two-shaft T200D micro-gas turbine engine in order to evaluate the impact of injecting ethanol directly into the compressor inlet air on the exhaust emissions. The study is carried out in constant speed and constant load engine tests. Generally, the results showed that when ethanol was added in a concentration of 20% by volume of fuel flow; NOx emission was reduced by the half, while CO and UHC emissions were almost doubled with respect to their levels when burning conventional LPG fuel alone.
The research involves using phenol – formaldehyde (Novolak) resin as matrix for making composite material, while glass fiber type (E) was used as reinforcing materials. The specimen of the composite material is reinforced with (60%) ratio of glass fiber.
The impregnation method is used in test sample preparation, using molding by pressure presses.
All samples were exposure to (Co60) gamma rays of an average energy (2.5)Mev. The total doses were (208, 312 and 728) KGy.
The mechanical tests (bending, bending strength, shear force, impact strength and surface indentation) were performed on un irradiated and irrad
... Show MoreIn this work ,pure and doped(CdO)thin films with different concentration of V2O5x (0.0, 0.05, 0.1 ) wt.% have been prepared on glass substrate at room temperature using Pulse Laser Deposition technique(PLD).The focused Nd:YAG laser beam at 800 mJ with a frequency second radiation at 1064 nm (pulse width 9 ns) repetition frequency (6 Hz), for 500 laser pulses incident on the target surface At first ,The pellets of (CdO)1-x(V2O5)x at different V2O5 contents were sintered to a temperature of 773K for one hours.Then films of (CdO)1-x(V2O5)x have been prepared.The structure of the thin films was examined by using (XRD) analysis..Hall effect has been measured in orded to know the type of conductivity, Finally the solar cell and the effici
... Show MoreSolar energy usage in Iraq is facing many issues; one of those is the accumulation “of the dust on the surface of the solar module which” would highly lower its efficiency. The present work study the effect of dust accumulation” on installing fixed solar modules with different inclined angles 15o, 33o, 45o, 60o. Evaluation of the solar modules performance under different circumstance conditions such as rain, wind and humidity are considered in study of dust effect on solar module performance. The results show that the lowest output average efficiencies of solar modules occurs at 15o horizontally inclined angle are 7.4% , 6.7% , 8.0% , 8.1%, and 8.4% for the cor
... Show MoreSilver selenide telluride Semiconducting (Ag2Se0.8Te0.2) thin films were by thermal evaporation at RT with thickness350 nm at annealing temperatures (300, 348, 398, and 448) °K for 1 hour on glass substrates .using X-ray diffraction, the structural characteristics were calculated as a function of annealing temperatures with no preferential orientation along any plane. Atomic force microscopy (AFM) and X-ray techniques are used to analyze the Ag2SeTe thin films' physical makeup and properties. AFM techniques were used to analyze the surface morphology of the Ag2SeTe films, and the results showed that the values for average diameter, surface roughness, and grain size mutation increased with annealing temperature (116.36-171.02) nm The transm
... Show MoreBackground: Diabetic is a chronic systemic disorder of glucose metabolism. That could be diagnosed using fasting and/or random plasma glucose and Glycated Haemoglobin (HbA1c). Several biochemical and microbial alterations of saliva could affect dental caries occurrence and severity among diabetic patients. The aim of the present study was to assess the relation of salivary glucose with severity of dental caries and Mutans Streptococci, among uncontrolled and controlled diabetic groups in comparison with non-diabetic control group. Materials and Methods: The total sample composed of adults aged (18-22) years. Divided into 25 uncontrolled diabetic patients (HbA1c > 7), 25 controlled diabetic patients (HbA1c ≤ 7), in addition to 25 no
... Show More