Comprehensive Study of <scp>PAN</scp>‐<scp>NaBF<sub>4</sub></scp> Solid Polymer Electrolytes: Insights Into Optical, Structural, Thermal, Electrical, and Electrochemical Properties for Sodium‐Ion Batteries
(9)
(10)
Publication Date
Thu Nov 19 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Structural, morphological and optical properties of spray pyrolysis TiO<sub>2</sub>:GO nano films
TiO2metal oxide
GO graphene oxide
structure
morphological and Optical properties.
Thin films of pure and doped nano titanium dioxide (TiO2) were prepared using a chemical pyrolysis technique (CPS), with different nanosize graphene oxide (GO) concentrations in the range (3-9)wt%. The structural, morphological andoptical characteristics of these films were investigated. X-ray diffraction (XRD) technique measurements revealed that the structure properties of TiO2have polycrystalline structure with anatase phase. AFM analysis showed the grain size of TiO2 films with different concentrations was decreased after doping with high concentration of GO ratio. Roughness of these films decreased too after adding of GO impurity for all films from (7.65-5.6)nm except 5wt% percentage where increased to 13.7nm. Optical
... Show More
(1)
(2)
Publication Date
Mon Jul 01 2019
Journal Name
Journal Of Physics: Conference Series
Effect of Nickel Substitution On Structural and Electrical Properties of Hg<sub>0.5</sub>Pb<sub>0.5</sub>Ba<sub>2</sub>Ca<sub>2</sub>Cu<sub>3-y</sub>Ni<sub>y</sub>O<sub>8+δ</sub> Superconductor Composite
Abstract<p>six specimens of the Hg<sub>0.5</sub>Pb<sub>0.5</sub>Ba<sub>2</sub>Ca<sub>2</sub>Cu<sub>3-y</sub>
<italic>Ni<sub>y</sub>
</italic>O<sub>8+δ</sub> (y=0.2,0.4,0.6,0.8,1.0) superconducting compound were prepared by solid state reaction method, with sintering temperature equal to 1123K for 24 hours. The electrical resistivity was examined by the four probe technique, It was found that all the specimens have metallic behavior and increasing the critical temperature with increasing nickel concentration. The optimum critical temperature T<sub>c</sub> was found equal </p>
... Show More
(4)
(3)
Publication Date
Tue May 01 2018
Journal Name
Journal Of Physics: Conference Series
(10)
(7)
Publication Date
Tue Oct 01 2024
Journal Name
Journal Of Physics: Conference Series
An investigation into the implications of partial substitution of selenium with lead on the thermal properties for S<sub>60</sub>Se<sub>40-X</sub>Pb<sub>X</sub> Chalcogenide Compound
Abstract<p>This study includes the manufacture of four ternary alloys represented S<sub>60</sub>Se<sub>40-X</sub>Pb<sub>X</sub> with weight ratios x = 0, 10, 20, and 30 by the melting point method. The components of each alloy were mixed separately, then placed in quartz ampoules and vacuumed out with a vacuum of roger that 10<sup>−4</sup> Torr. The ampule was heated in two stages to avoid sudden dissipation and precipitation of selenium on the inner mass of the quartz tube. The ampoule was gradually heated and kept at 450°C for approximately 4 hours followed by 950°C for 10 hours.at a rate of 10 degrees Celsius, the temperature of the electric furnace</p>
... Show More
Engineering controlled terms
Electric arc furnaces
Glass manufacture
Lead alloys
Melting point
Selenium compounds
Engineering uncontrolled terms
950° C
Chalcogenide compound
Melting point method
Partial substitution
Property
Quartz ampoule
Quartz tubes
Rapid cooling
Thermal
Weight ratios
Engineering main heading
Heat flux
Publication Date
Tue May 01 2018
Journal Name
Journal Of Physics: Conference Series
(31)
(15)
Publication Date
Mon Jul 01 2019
Journal Name
Journal Of Physics: Conference Series
Electrical Properties of AgSb(S<sub>x</sub>Se<sub>1-x</sub>)<sub>2</sub> Thin Films
Alloys from AgSb(SxSe1-x)2 with different compositions were prepared using quenching from the melt . This was done by put the appropriate amount of Ag, Sb,S and Se in an evaluated quartz ampoule , sealed and left at oven in temperature 1273 for 5 hours. Thin films with different composition were deposited by pulsed deposition technique PLD onto glass substrates at ambient temperature . This paper concerned on the investigate effect of composition on structural morphology, and electrical properties. The structure and morphology of the prepoared thin films were checked using X–ray diffraction and atomic force microscope. The D.C conductivity of the AgSb(SxSe1-x)2thin films with various x content was measured
... Show More
Publication Date
Sun Nov 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Dielectric properties and A.C electrical conductivity analysis of (La<sub>2</sub>O<sub>3</sub>)<sub>1-x</sub>(ZnO)<sub>x</sub>
Summery<p>The A.C conductivity of three samples of lanthanide oxide : zinc oxide (La<sub>2</sub>O<sub>3</sub>)<sub>1-x</sub>(ZnO)<sub>x</sub> pellets with different zinc oxide content which were sintered 1273 K temperatures were studied using LRC meters in the frequency range of 50–10<sup>6</sup> Hz at temperature of 30 °C. The a.c conductivity, was analyzed depending of the universal power law proposed by Jonsher,. The slope of the relation between logarithm of a.c conductivity and angular frequency represent the s value were in the range (0.44-0.77) which found to increase by increasing of zinc oxide content which coincided with the small po</p>
... Show More
a.c conductivity
dielectric constant
(La2O3)1-x(ZnO)
(8)
(1)
Publication Date
Sun Nov 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Investigation effect of ZnO content on the structural and electrical properties of pulsed laser deposited (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> thin films
Abstract<p>This research is devoted to the effect of investigation of the ZnO content on the structural and electrical properties of (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> films prepared by pulsed laser precipitation on the glass substrate at room temperature. Thin-film (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> sediments were deposited with different composition ratios where x = 0, 0.2, 0.4, 0.6 and 1.0 with a thickness of n150nm. The diffraction pattern for X-ray analysis reveals that the structure of the prepared thin films is identical with the cubic phase and hexadecimal stage of x = 0 and 0.1, respectively while the structure is mixed with the remaining x </p>
... Show More
NiO
ZnO
PLD
thin films (NiO )1-x(ZnO)x
(1)
(1)
Publication Date
Mon Mar 01 2021
Journal Name
Journal Of Physics: Conference Series
Investigating the Effect of ZnO on the Structural and Optical Properties of (MgO)<sub>1-x</sub>(ZnO)<sub>x</sub> via Pulsed Laser Deposition
Abstract<p>This work concerned with effect of zinc oxide concentrating on the structural and optical properties of (MgO)<sub>1-x</sub>(ZnO)<sub>x</sub> thin films. (MgO)<sub>1-x</sub>(ZnO)<sub>x</sub> compounds were produced by mixing the two oxides powders accordance to the atomic ratios and compressed as pellets, these pellets were sintered in an oven at temperature1273K for five hours. Thin films from (MgO)<sub>1-x</sub>(ZnO)<sub>x</sub> compounds were obtained using pulsed laser deposition technique using Nd:YAG laser . The results of x-ray diffraction as well as UV-Visible- spectrophotometer measurements transmittance of (MgO)<jats></jats></p>
... Show More
PLD
(MgO)1-x(ZnO)x
XRD.
(2)
Publication Date
Sun Mar 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
The Influence of x ratio and Annealing Temperatures on Structural and Optical Properties for (CuO)<sub>x</sub>(ZnO)<sub>1-x</sub> Composite Thin Films Prepared by PLD
Abstract<p>Thin films of (CuO)<sub>x</sub>(ZnO)<sub>1-x</sub> composite were prepared by pulsed laser deposition technique and x ratio of 0≤ x ≤ 0.8 on clean corning glass substrate at room temperatures (RT) and annealed at 373 and 473K. The X-ray diffraction (XRD) analysis indicated that all prepared films have polycrystalline nature and the phase change from ZnO hexagonal wurtzite to CuO monoclinic structure with increasing x ratio. The deposited films were optically characterized by UV-VIS spectroscopy. The optical measurements showed that (CuO)<sub>x</sub>(ZnO)<sub>1-x</sub> films have direct energy gap. The energy band gaps of prepared thin films </p>
... Show More
(6)
(5)