Palladium nanoparticles are produced by Polyol method. The characterization of the Pd nanoparticle has been conducted by various techniques such as SEM and AFM. The results of Pd powder showed that the particle size is directly proportional to the temperature and the reaction time. The optimum conditions for obtaining minimum nanoparticles size are 45 oC reaction temperature and 60 min reaction time and the smaller particle size achieved is equal to 25 nm. The optical limiting of smaller size nanoparticles has been studied. The palladium nanoparticles appear to be attractive candidates for optical limiting applications.

The present study was conducted with a view to determine whether focal laser therapy result in visual recovery and regression of macular edema in patients with non proliferative diabetic retinopathy and maculopathy ,and whether combined focal and scatter laser therapy in patients with proliferative diabetic retinopathy and maculopathy results in visual recovery ,regression of macular edema and regression of the risk factors. In the present work, a frequency doubled Nd: YAG laser was used for the treatment of diabetic retinopathy. The study evaluates 41 eyes of 33 diabetic patients both with Insulin Dependent Diabetes Mellitus IDDM, (n=16) and Non Insulin Dependent Diabetes Mellitus NIDDM, (n=17) with diabetic retinopathy divided into two

The effect of the concentration of the colloidal nanomaterial on their optical limiting behavior is reported in this paper. The colloids of sliver nanoparticles in deionized water were chemically prepared for the two concentrations (31 ppm and 11ppm). Two cw lasers (473 nm Blue DPSS laser and 532 nm Nd:YAG laser) are used to compare the optical limiting performance for the samples. UV–visible spectrophotometer, transmission electron microscope (TEM) and Fourier Transformation Infrared Spectrometer (FTIR) were used to obtain the characteristics of the sample. The nonlinear refractive index was calculated to be in the order of 10-9 cm2/W. The results demonstrate that the observed limiting response is significant for 532nm. In addition, t

Photonic Crystal Fiber Interferometers (PCFIs) are widely used for sensing applications. This work presents the fabrication and the characterization of a relative humidity sensor based on a polymer-coated photonic crystal fiber that operates in a Mach- Zehnder Interferometer (MZI) transmission mode. The fabrication of the sensor involved splicing a short (1 cm) length of Photonic Crystal Fiber (PCF) between two single-mode fibers (SMF). It was then coated with a layer of agarose solution. Experimental results showed that a high humidity sensitivity of 29.37 pm/%RH was achieved within a measurement range of 27–95%RH. The sensor also showed good repeatability, small size, measurement accuracy and wide humidity range. The RH sensitivity o

Abstract: Narrow laser pulses have been essential sources in optical communication system. High data rate optical communication network system demands compressed laser source with unique optical property. In this work using pulsed duration (9) ns, peak power 1.2297mW, full width half maximum (FWHM) 286 pm, and wavelength center 1546.7 nm as compression laser source. Mach Zehnder interferometer (MZI) is built by considering two ways. First, polarization maintaining fiber (PMF) with 10 cm length is used to connect between laser source and fiber brag grating analysis (FBGA). Second, Nested Mach Zehnder interferometer (NMZI) was designed by using three PMFs with 10 cm length. These three Fibers are splicing to sing

Objective: Recurrent Aphthous Stomatitis (RAS) is a common, painful, and recurrent oral condition characterized by ulcer formation. Its pathogenesis is multifactorial, involving genetic, immunological, and environmental factors. conventional methods like topical anesthetics, such as benzocaine. Mouth rinses containing hydrogen peroxide, chlorhexidine, or dexamethasone. Corticosteroid ointments, such as fluocinonide, beclomethasone, or hydrocortisone hemosuccinate, primarily focus on symptom relief rather than cure. Low-level laser therapy (LLLT) has emerged as a promising treatment modality, offering minimal invasiveness and effective healing. 

Case Presentation:  A 28-year-old female patient pr

his paper uses the finite element method (FEM) to study a Surface Plasmon Resonance (SPR) refractive index sensor based on D-shaped Polarization Maintain Photonic Crystal Fiber (PM-PCF). A chemically stable plasmonic material, gold (Au), with hemispherical structures having a radius of 50 nm, is applied to the surface of a D-shaped sensor to create the surface plasmon resonance (SPR) effect, enabling this SPR sensor to detect variation in the surrounding analyte refractive index (RI). The resonance condition will change when the refractive index of the targeted analyte changes, leading to a certain shift in the loss peak. Two resonant peaks are observed, one located in the visible part of the spectrum, and the second in the near-infrared

This research introduces a novel approach to enhancing solar-to-hydrogen (STH) efficiency by applying laser illumination with the assistance of a UV source to illuminate the photoanode in photoelectrochemical (PEC) cells, representing a significant departure from conventional methods relying solely on solar light. The photoanode was fabricated using a (CeO₂ and Cu) nanoparticles thin film through the drop-casting method, the materials were chosen for their favorable optical and electronic properties, which are key in improving the hydrogen production rate. What sets this study apart is the innovative use of laser illumination, which allows for more precise and concentrated light absorption that match the materials' absorption peaks com

The spectral characteristics and the nonlinear optical properties of the mixed donor (C-480) acceptor (Rh-6G) have been determined. The spectral characteristics are studied by recording their absorption and fluorescence spectra. The nonlinear optical properties were measured by z-scan technique, using Q-switched Nd: YAG laser with 1064 nm wavelength. The results showed that the optimum concentration of acceptor is responsible for increasing the absorption and the emission bandwidth of donor to full range and to 242 nm respectively by the energy transfer process, also the efficiency of the process was increased by increasing the donor and acceptor concentration. The obtained nonlinear properties results of the mixture C-480/ Rh-6G showed

In this work, results of a mathematical analysis of the role of workpiece preheating in laser keyhole welding were presented. This analysis considered the steady-state welding as well as certain range of boundary conditions over which preheating effect would be indicated. This work is an attempt to interpret the role of preheating to increase welding depth and perform keyhole welding with high quality using physical and thermal properties of steel alloys.

 The microdrilling and nanodrilling holes are produced by a Q-switched Nd :YAG laser (1064 nm) interaction with 8009 Al alloy using nanoparticles. Two kinds of nanoparticles were used with this alloy. These nanoparticles are tungsten carbide (WC) and silica carbide (SiC). In this work, the microholes and nanoholes have been investigated with different laser pulse energies (600, 700 and 800)mJ, different repetition rates (5Hz and 10Hz) and different concentration of nanoparticles (90%, 50% and 5% ). The results indicate that  the microholes and nanoholes have been achieved when the laser pulse energy is 600 mJ, laser repetition rate is 5Hz, and the concentration of the  nanoparticles (for the two types of n

الخلاصة:تم تحضير ودراسة مستشعرات الألياف البلورية الضوئية (PCF) المستنده على رنين البلازمون السطحي مع طبقة من الذهب في هذا البحث للكشف عن درجة حرارة البيئية. يتم استخدام طريقة العناصر المحدودة لزيادة معلمة الهندسة الحرجة.ثقب الهواء الموجود على الجانب الأيمن من قلب ال PCF مغطاة بمادة ذهبية بلازمونية مستقرة كيميائيًا يبلغ سمكها 50 نانومتر. كان للالياف البلورية الضوئية ذات الفتحات الهواء الدائرية المطلية بالذهب

                                                                                                                الحاجة الى مصادر الفوتون المنفرد في منظومات توزيع المفتاح الكمي ادت الى استخدام النبضات الضعيفة المتشاكهة والتي لها توزيع بواسون. لكي يتم منع هجمات التنصت, يجب الحفاظ على معدل لعدد فوتونات قليل ومعروف للشركاء الموثوقين.عدا ذلك فأن قيمة معدل عدد الفوتونات لا يمكن ايجادها بدق

Abstracts:

Background: The oral cavity is a complex environment, both structurally and functionally, the hard and soft tissues are in close a proximity. Oral tissues subjected to wear throughout the life, that threatened the vitality of the pulp or increase the sensitivity of dentinal tubules. One of the common dental problems is loss of enamel or cementum, which stimulate the nerve ending in or near the pulp and manifested as pain sensation. Aim of the study: This study had done to evaluate the effects of 980nm diode Laser in diameters reduction of exposed dentinal tubules analyze the results and morphological changes of irradiated dentine surface by FE-SEM (field emission scann

Abstract: Periodontitis is a chronic, complex inflammatory condition linked to dysbiotic plaque biofilms and marked by the progressive deterioration of the tooth-supporting structures. Porphyromonas gingivalis, a critical periodontal infection, is known to significantly contribute to the onset and advancement of periodontal illnesses by inducing a dysbiotic alteration in the overall, particularly sub-gingival, gram-positive and gram-negative periodontal microbiota. Conventional therapies, including scaling and root planing (SRP), seek to eliminate plaque and tartar from the surfaces of teeth and subgingival areas. Nonetheless, these treatments are accompanied by certain limitations.The advent of diode lasers has demonstrated potential as

This case report evaluates the clinical outcomes of oral fibroma excision using a 980 nm diode laser, focusing on its effectiveness in reducing postoperative discomfort, promoting healing, and improving esthetic outcomes. A 980 nm diode laser was used in CW mode at 2 watts of power to remove two fibrous masses on the buccal mucosa from a 65-year-old male patient who had presented with these lesions. The procedure was performed under local anesthesia using 2% lidocaine with 1:80,000 epinephrine. Postoperative evaluations were performed at follow-up visits on the 3rd day, 1st week, 2nd week, and 4th week to evaluate bleeding, pain, edema, functional interference, mucosal scarring, and healing through standardized clinical indices. At each

To assess the therapeutic efficacy of fractional CO₂ laser and MI varnish alone and their combined effects in two cases ( CO₂ Laser before and after the application of MI varnish). Method: 60 enamel samples were prepared, and then the samples were passed through the pH cycling process to induce a demineralized enamel surface. The samples were categorized into five groups: control, CO₂ laser, MI varnish, CO₂ laser with MI varnish, and MI varnish with CO₂ laser. Surface alterations were evaluated using the Vickers microhardness assessment, surface roughness, and the Scanning Electron Microscope (SEM) combined with the Energy-Dispersive X-ray Spectroscopy (SEM-EDX).Results: All of the microhardness results were diminished after th

Abstract: The development of highly sensitive sensors has become an efficient field of research. In this work, an ArF Excimer laser of 193 nm with a maximum pulse energy of 275 mJ, 15 ns pulse duration and a repetition rate of 1 Hz is utilized to form a Laser Induced Periodic Surface Structures (LIPSS) of three different morphologies (nanochains, contours, grooves) on surface of CR39 polymer at a fluence range above the ablation threshold (250 mJ/cm2). The laser ablated polymer surface is then Surface Enhanced Raman Scattering (SERS) activated by deposition of a gold layer of 30 nm thickness. The capability of the produced substrate for surface enhanced Raman scattering is evaluated through thiophenol as an analyte molecule. It is observ

we studied the effect of low level laser therapy (LLLT) using diode laser with wavelength of (790-805) nm in promotion and enhancement of wound healing of episiotomy and to evaluate the analgesic effect of LLLT in reducing the pain sensation caused by the episiotomy wounds. Nineteen women with episiotomy wound were selected and divided into three groups; 1st group (group No.1: control group) given antibiotics without laser therapy, in the 2nd group (group No.2) the wounds were exposed to laser therapy (4 sessions, each session with energy density of 19.90 J /cm2 every other day ) and systemic antibiotics were prescribed for 1 week. In the 3rd group (group No.3) the wounds were exposed to laser therapy (4 sessions, the same as in the 2nd

The biological effects of pulsed N2-laser on the old world screw-worm fly, Chrysomya bezziana Villeneuve in the pupal stage were investigated. Different laser parameters were involved in this work. The old pupae of 1, 2, 3, 4 and 5 days were exposed to laser radiation during 10, 30 and 60 second with repetition rate 10, 20 and 30 pulse/second. The percent of normal adults emergence (female and male) was investigated. The results showed that the adults emergence was highly decreased as the repetition rate and exposure time increased when the pupae irradiated for 1, 2 and 3 days old as compared with 4 and 5 days. The results also indicated that the pupal period was significantly increased of irradiated pupae for 1, 2, 3 and 4 days old, whi

Background: Urinary incontinence (UI) is a common disorder that affects women of various ages and impacts all aspects of life. This condition negatively influences quality of life. Fractional CO₂ laser (10600nm) is the recent method for treatment of stress urinary incontinence in women. Objectives: The purpose of the study was to evaluate the efficacy and safety of fractional CO₂ laser (10600nm) in the treatment of female stress urinary incontinence. Materials & Methods: This study was done from July 2020 to February 2021conducted at the laser institute for postgraduate studies university of Baghdad, patients collected from a private clinic and the Department of

It is found that hypersensitive teeth have a larger number and wider patent tubules than those of non-sensitive teeth. Objective: The aim of this study is to compare between the effects of diode laser at different power densities, with and without sodium fluoride on the sealing of exposed dentinal tubules and dentin permeability. Materials and methods: 118 teeth were used. Samples were divided into three major groups. The first consisted of 100 teeth used for permeability test. The second consisted of 16 teeth for measuring external surface temperature elevation while irradiation. The third, in turn, consisted of one pair of teeth observed under SEM for dentine surface morphology analysis. Results: For dentin permeability measurement, th

A tunable band pass filter based on fiber Bragg grating sensor using an in-fiber Mach-Zender interferometer with dual micro-cavities is presented. The micro-cavity was formed by splicing together a conventional single-mode fiber and a solid core photonic crystal fiber (SCPCF) with simple arc discharge technique. Different parameters such as arc power, length of the SCPCF and the overlap gap between samples were considered to control the fabrication process. The ellipsoidal air-cavity between the two fibers forms Fabry-Perot cavity. The diffraction loss was very low due to short cavity length. Ellipsoidal shape micro-cavities were experimentally achieved parallel to the propagation axis having dimensions of (24.92 – 62.32) μm of width

الهدف: لتقييم تأثير معلمات التشعيع تحت الاستئصالي لليزر Er;Cr:YSGG على التضاريس السطحية لمينا الاسنان اللبنية مع آفات البقع البيضاء.

الطرق والادوات:تم إخضاع ما مجموعه 30 سناً خلفياً لبنياً بمينا سليمة في البداية إلى محلول نزع المعادن عند (PH 4.4) لتحفيز آفات البقع البيضاء بشكل مصطنع. ثم تم تقسيمها عشوائياً إلى أربع مجموعات (العدد= 10): مجموعة التحكم (N)، المجموعة L1 المشععة بليزر 0.75 واط، المجموعة L2

ان بروتوكول توزيع المفتاح الكمي المعتمد على ترميز الاستقطاب هو بروتوكول يتم استخدامه بشكل واسع من اجل مشاركة مفتاح سري ما بين المرسل والمستقبل. بينما تنتقل النبضات البصرية التي يتم ترميز استقطابها من خلال القناة الكمية, فان حالات الاستقطاب لتلك النبضات من الممكن ان تتغير. لذلك من المطلوب التحقق المسبق من صفات القناة من اجل التحقق من تأثير القناة على استقطاب النبضات التي تمر من خلالها. في هذا العمل, التحقق عم

الخلاصة:

الخلفية والمعلومات : الورم الليفي اللثوي حالة من تمدد اللثة تحدث خلال بزوغ الاسنان وتاخر ضهورها . كل من تقنية استخدام الشفرة الجراحية والكي الكهربائي والليزر يمكن استخدامه لاستئصال الورم الليفي اللثوي.

الهدف من الدراسة: تقدير كفائة الدايود ليزر وفوائده فوق الشفرة الجراحية لمعالجة الورم الليفيي اللثويز

المواد والطريقة: 40 مريض يشكون من المشاكل الوضيفية والجمالية بسبب تاخر ضهو

Aim: The Aim of the study is to compare between Er,Cr:YSGG 2780 nm laser and carbide fissure bur in root-end resection regarding the morphological variations, temperature changes and the duration of resection process.

Settings and Design: 5 W, 25 Hz, 50% water, 80% air,25.47 J/cm2 .

Material and method: twenty-one extracted single rooted teeth endodontically were treated, twenty teeth were obturated and divided into two groups according to method of resection. Group 1 root-end resected using cross cut carbide bur while group 2 root-end resected using laser with MGG6 sapphire tip of 600 μm diameter. Temperature on external root surface and duration of resection were recor

This prospective study investigates the prevalence of methicillin-resistant S.aureus (MRSA)
in burn unit of Al-Kindy Iraqi hospital, their susceptibility to antibiotics and bactericidal effect of near
infrared light from high powered 1064nm Nd: YAG laser and green light 532nm from SHG Nd: YAG laser
using various energy densities on these bacteria. Twenty four clinical isolates of S.aureus out of sixty
four examined patients with sever burn ulcers.MRSA was associated with 50% of S.aureus infections
.Results of antimicrobial susceptibility revealed that MRSA were multidrug resistant. After laser treatment
of non MRSA with Nd:YAG with wavelength of 1.064nm, 4mm beam diameter, energy density of
0.636 kh/cm2 and 180sec ex

This work focused on principle of higher order mode excitation using in- line Double Clad Multi-Mode Mach-Zehnder Interferometer (DC-MM-MZI). The DC-MM-MZI was designed with 50 cm etched MMF. The etching length is 5cm. The tenability of this interferometer was studied using opt grating ver.4.2.2 and optiwave
ver. 7 simulator. After removing (25, 35, 45, 55) μm from MMF and immersing this segment of MMF with water bath contained distilled water and ethanol, in addition to, air. Pulsed laser source  centered at 1546.7nm ,pulse width 10ns and peak power 1.33mW was propagated via this interferometer Maximum modes were obtained in case of air surrounded media which are 9800 and 25 um removed cladding layer, with peak power 49.800 m

Background: Surface treatment of machined dental zirconia for enhancement of the adhesion to resin cement, using Er,Cr:YSGG  Laser. Materials and Methods: Total number of 42 zirconia disc specimens (9 mm diameter, and 2 mm height) was sintered according to the manufacturer instruction. They are divided into six groups, each group of seven samples. Laser groups (Experiment parameters) were depend on laser total irradiation time, pulse duration, and power. Group (A): 20 sec., 60 µs pulse duration. Group (B): 30 sec., 60 µs pulse duration. Group (C): 40 sec., 60 µs pulse duration. Group (D): 20 sec., 700 µs pulse duration. Group (E): 30 sec., 700 µs pulse duration, with different powers used (1, 1